Đang Tải...

0916.654.434

VI

Tiếng Anh
Tiếng Việt

VI

Tiếng Anh
Tiếng Việt
Products

Imported asphalt drums by Tratimex

Imported asphalt drums by Tratimex

Imported asphalt drums by Tratimex

Imported drummed asphalt by Tratimex meet international quality standards, industry standards and regulations of the Ministry of Transport. This asphalt is imported from refineries in the Middle East with the net weight is 185 +/- 3 kg/drum.

Liên hệ với chúng tôi

0916.654.434
Thông tin sản phẩm
Tiêu chuẩn chất lượng
Các giải pháp của sản phẩm
Dự án tiêu biểu

Imported drummed asphalt by Tratimex meet international quality standards, industry standards and regulations of the Ministry of Transport. This asphalt is imported from refineries in the Middle East with the net weight is 185 +/- 3 kg/drum.

Users of drummed asphalt provided by Tratimex will receive a certificate of quality for each shipment and the testing report issued by the Institute of Transport Science and Technology under the Ministry of Transport. 

Notes: 

  • When heating up the asphalt, it is recommended to use a heating system with automatic control to ensure a stable temperature around approx. 130°C.
  • If heating up by using with direct flame, care should be taken to prevent the asphalt from catching fire.
  • The heating temperature must not exceed the safe limit 230°C.
     

We will send imported packaged asphalt products provided by Tratimex with a quality certificate of each shipment and asphalt test results issued by the Institute of Transportation Science and Technology under the Ministry of Transport. .

Technical specifications of imported plastic barrels:

No Test Item Unit Specification
TCVN 7493:2005		 Test method
 
1 Penetration at 25 oC- 100g ,5 sec. 1/10mm Min: 60
Max: 70		  (ASTM D5)
2

Penetration Index

         Min: -1.5            
        Max: 1.0            
3 Softening Point                         oC Min: 46 ASTM D 36
                 
4

Dynamic Vicosity at 60 Deg C, 

   Pa.s     Min 180 ASTM D2171
                         
5 Ductility at 25oC-5cm/min. cm Min: 100 ASTM D113
6 Specific Gravity at 25oC g/cm3 1.00 - 1.05 ASTM D70
7 Flash Point (Open cup) oC Min: 232 ASTM D92
8 Solubility in Trichloethylene % Min: 99 ASTM D2042
9 Paraffin wax content % Max: 2.2 DIN 52015
10 Thin Film Oven Test                          
                         
10.1 Loss on heating 163oC - 5 hours % Max: 1.0 ASTM D1754
10.2 Penetration. Of recsidue. Percent of original % Min: 50 ASTM D5
10.3 Ductility at 25oC-5cm/min. cm   75 D113
 

Nhập vào từng lớp để biết chi tiết

images full images
images
images
images
images

Asphalt layer thickness

Adhesive layer of asphalt

Two Layers of Asphalt Base

Crushed stone layer, gravel base

Anti-frost layer

Asphalt layer thickness

Asphalt layer thickness: [4-5 cm]. The following Tratimex products can be used for the surface layer: hot solid asphalt, Polymer modified asphalt, imported plastic in barrels, liquid plastic in barrels.

Adhesive layer of asphalt

Adhesive asphalt layer: [4-8 cm], helps ensure adhesion between layers of the road surface.

Two Layers of Asphalt Base

Adhesive asphalt layer: [4-8 cm], helps ensure adhesion between layers of the road surface.

Crushed stone layer, gravel base

Crushed stone layer, gravel base: [15-30 cm]

Anti-frost layer

Frost protection layer: [14-50 cm] this is the first layer in the road construction

Lang - Hoa Lac Expressway with a length of 29km

Lang - Hoa Lac Expressway with a length of 29km

Noi Bai - Lao Cai Expressway with a length of 264km

Noi Bai - Lao Cai Expressway with a length of 264km
zalo
Thông báo
Đóng